obd2-bt-stm32
CAN sniffer firmware
Firmware for a low-cost CAN sniffer using an OBD2 protocol implementation
Firmware for the cheapest can sniffer
35 stars
5 watching
15 forks
Language: C
last commit: 7 months ago
Linked from 1 awesome list
Related projects:
Repository | Description | Stars |
---|---|---|
majbthrd/cansniffer | A CANbus sniffer implemented in an ARM microcontroller using a single IC to output received messages on the CANbus over a USB virtual CDC serial port. | 29 |
qnx425/elm327slcan | A device that captures and decodes CAN bus messages from vehicles using the ELM327 chip. | 53 |
dirtyjtag/dirtyjtag | Firmware for a low-cost JTAG probe | 483 |
genielabs/homegenie-mini | A programmable smart device firmware for IoT applications and smart home automation | 9 |
darkspr1te/elm327_clone | Firmware implementation for a specific automotive diagnostic device using the PIC18F25K80 microcontroller. | 37 |
scipag/btle-sniffer | A utility for monitoring and analyzing Bluetooth Low Energy traffic on Linux systems. | 145 |
matheus-garbelini/esp32_bluetooth_classic_sniffer | A tool that enables active sniffing and injection of Bluetooth Classic Baseband packets on ESP32 boards. | 506 |
okhsunrog/can_wizard | A microcontroller-based CAN bus communication system | 17 |
seeers/can-bus-arduino_core_stm32 | An Arduino Core STM32 project providing a low-level CAN bus interface | 11 |
jiaoxianjun/btle | Software defined radio Bluetooth Low Energy packet sniffer and transmitter | 734 |
greatscottgadgets/ubertooth | A platform for Bluetooth experimentation and sniffing | 1,947 |
jposada202020/micropython_ags02ma | Provides a MicroPython driver for the AGS02MA TVOC sensor | 0 |
magnusthome/esp32_obd2 | An Arduino library for reading OBD-II data from cars over CAN bus | 28 |
randomserj/esp32_canbus_gateway | A MicroPython-based gateway for decoding and transmitting CAN bus messages from TJA1050 sensors on an ESP32 device | 17 |
sandeepmistry/arduino-obd2 | A library for reading OBD-II data from cars over CAN bus | 460 |